Configuration Of Wireless Access Point 300 Mbps.
Device Defaults IP Address – 192.168.1.1, Password: admin or password.
Step: 1
To access the configuration utility, open a webbrowser such as Internet Explorer and enter the IP
address of the Device (192.168.1.1).
Step: 3 Go to Internet / WAN select Connect Via – Disabled
Configuration Of Speedifi Wireless Access Point 300 Mbps.
SBLW24i Device Configuration Manual.
Speedifi Wireless Device Firmware Download,SBLW24i Latest Firmware ,SBLW58E Firmware ,Speedifi Firmware for Binatone PCB Download Free.
Speedifi Router Configuration
NLTech Device Configuration Manual Step To Step .
NLTech Device Default Username Password and ip address
Device Defaults IP Address – 192.168.1.1, Password: admin or password.
Step: 1
To access the configuration utility, open a webbrowser such as Internet Explorer and enter the IP
address of the Device (192.168.1.1).
Step: 2 Select Gateway / WISP (Default) and click save changes
Step : 4 Go to Wireless :
1. Select Wireless Mode – Access Point (AP)
2. Access Point SSID Service Set Identifier (SSID) is the name of your wireless network
Step : 5
Wireless Security : This section will show you the different levels of security you can use to
protect your data from intruders
Go to Encryption select Security type from, WPAPSK, WPA2PSK, WEP, WAP RADIUS, WPA2 RADIUS
After select security type set password .
Step 6 : Click Save Changes
After Save changes Device will take Few Seconds to rebooting. After rebooting plug internet cable to
device and connect Laptop/Mobile through wireless.
Enjoy Internet........................
SBLW24i Device Configuration Manual.
Speedifi Wireless Device Firmware Download,SBLW24i Latest Firmware ,SBLW58E Firmware ,Speedifi Firmware for Binatone PCB Download Free.
Speedifi Router Configuration
NLTech Device Configuration Manual Step To Step .
NLTech Device Default Username Password and ip address
0 comments:
Post a Comment
Note: only a member of this blog may post a comment.